315T H-Frame Hydraulic Deep Drawing Press Equip Servo Motor And CNC
- H frame hydraulic press machine/ Table hydraulic press machine
- Four-angle and eight-side guide to keep high precision of press
- Deep drawing and stamping pressing adopt ejection cylinder and
- Cold or heat hydraulic oil press machine
- Apply to industry of machine tool, power engine, axle, bearing,
washing machine, plastic product, powder molding, electric and etc.
- Equip servo motor and CNC control system.
- Three operation model, manual, semi-auto and auto; equipped hands
operation button and emergency stop button
- Big hydraulic press model 100 ton,160 ton,200 ton, 315 ton,400
ton,500 ton,630 ton, 800 ton,1000 ton,1250 ton,1600 ton and 2000
- Working speed, idle speed and return speed can be adjustable.
- YH27 Series Frame-type Hydraulic Press is a kind of multifunctional
precision machine which has high speed.
- Optimized design, the frame is entirely welded with steel plates,
and treated to relive stress by tempering for high precision.
- Cartridge valve equipped for hydraulic control system, reliable,
durable and less hydraulic shock, shorter connection pipeline and
fewer release points.
- Centralized button control system, with adjustment, hand and
semi-auto operation modes at operator’s choice (set-stroke single
and set pressure single).
- Four-angle and eight-side guide rail in high precision and with
strong capacity against deflection, concentrated lubrication.
- New type of oil cylinder sealing components marked by high
reliability and long service life.
- Sliding blocks operating in high speed, ensuring high efficiency.
- The slide operating pressure, no-load quick travel and low-speed
movement can be adjusted according to technological requirements.
- Hydraulic cushion is fitted beneath the worktable; adequate
knockout hole and hydraulic cushion are prepared on the plate of
worktable with the operating modes including drawing, ejection and
- The working speed of this equipment is 3 to 4 times faster than
that of Y41. It employs eight-side guide device and ejecting
device, which can automatically eject workpieces with accurate
guiding and fast speed.
- The drawing device can be added to this equipment in order to
change moulds easily. But the stretching of large metal parts needs
to add hydraulic cushion to this equipment.
- It is suitable for the press fitting and stretch forming of metal
and plastic products as well as the movements of coining and
- It mainly applies to the fields of machine tool, engineering
machinery, bearings, washing machine, automobile parts, motor
components and powder metallurgy.
- It is suitable for the molding of plastic products, such as DMC and
- The machine, with a high degree of automatization, is particularly
suitable for the mass production of parts. And it can be used as
assembly line with several such equipments.
- YH27-315T H Frame Hydraulic Deep Drawing Press of CE Safety
standards for making pot,cookware.
Cushion Return force
Height Above the floor
Height below the ground level
Configurations of main components:
Security Light Curtain
Quality product, China
Quality product, Taiwan
Tian Li, Beijing
Notes: S stands for standard configuration, and O stands for
1. CE, ISO Certification.
2. We can supply KLT brand or OEM for clients.
3. We can supply product line solution according to clients’
4. Independent electrical control with PLC and TPC.
5. Adopted Rexroth Hydraulic valve system/Siemens Motor to ensure
that the hydraulic system is not leaking.
6. The pressure, stroke, and time of pressure maintaining can be
7. High quality and performance with good price.
8. Safe and stable operation.
9. Support 7*24 remote service or locate service.
10. Supply maintenance service all life.